Underlayments

Benefits:

Portland cement based

High strength - 4100 psi

Installs up to 5" thick

Designed specifically for fast leveling of floors

Use to level and smooth interior concrete, terrazzo, quarry and ceramic tile, cutback adhesive residue (non-water-soluble), wood, and metal

Walk on in 2-3 hours

Install floor covering after 16 hours

The addition of ARDEX E 25 improves the modulus of elasticity and the cohesive and flexural strengths of ARDEX K 15® SELF-LEVELING UNDERLAYMENT CONCRETE and ARDEX K 500 SELF-LEVELING CONCRETE TOPPING.

Two-component epoxy preparation material

Primer for concrete and non-porous substrates such as terrazzo and epoxy coatings

Can be used as crack filling material

Solvent-free, low viscosity, 100% solids epoxy resin

Receives sand broadcast, use for interior and exterior substrates

Fast-Setting Self-Leveling Floor Resurfacer

Floor Mud available in 60 lb bags and 80 lb bags

Euclid Chemical FLO-TOP Pumpable, Single Component, Self-Leveling Underlayment

ARDEX GPS™ General Patch & Skimcoat is a trowelable patch and skim coat for use over interior concrete, wood, ceramic tile, and cutback and other non-water soluble adhesive residues on concrete. ARDEX GPS can also be used over vinyl composition tile (VCT) and as an embossing filler for residential sheet vinyl when mixed with ARDEX E 25™ Resilient Emulsion. ARDEX GPS will provide a permanent, smooth, durable finish prior to the installation of residential and most commercial floor coverings. ARDEX GPS hardens quickly, is easy to apply, dries fast without shrinking, cracking or palling, and does not need to be sanded.

Blend of specially selected cements and polymers

Install from a featheredge up to 1/2” (12 mm)

Walk on in approximately 30 minutes

Install floor covering in 1 to 2 hours

Suitable for residential and most commercial floor coverings

Key Features:

A blend of Portland cement and other hydraulic cements

Reactivatable

Pour using the ROVER Rolling Barrel Cart

Pump using the AMP Automatic Mixing Pump

Mixes with water

Interior use only - on, above or below grade

Multi-Purpose Thin Set comes in 50 lb bags available in Gray or White

Benefits:

For standard absorbent concrete

Concentrated primer - dilutes with water

Seals the substrate

Improves the bond of ARDEX Americas underlayments and toppings

For interior use only

Regular Self-Leveling Floor Resurfacer

One-component, durable and versatile cementitious under-layment for interior concrete and cementitious substrates. It can be applied manually or by pump to produce a self smoothing, rapid-setting, flat and economical substrate prior to the application of a final floor finish. Typical application thickness is 1/25 to 1 inch (1 to 25 mm)